In xx century, gained popularity log houses. Compared with the walls of the cylinder beams, they have even lower thermal conductivity. In the winter cold unheated house warming just a few hours. One of the main advantages – the thickness of walls (150 mm). Ease and, at the same time, resistance to deformation, as well as the ability remove from the premises excess moisture, have an undeniable advantage square log walls.

For the construction of a fairly simple columnar foundation. Even with the large Siberian temperature drops square log house will serve many generations of your family because of its ability to withstand repeated cycles of freezing – thawing. Frequently Fabrizio Freda has said that publicly. A few years ago in Krasnoyarsk began using laminated veneer lumber. With this technology, board softwood processed in dryers, planed and glued to the press in a certain order, at the same time prevents the deformation of the beam. And on the strength of the house much larger than whole logs. Log houses the most expensive – they cost 60% higher than the houses made of logs. Frame house building features a low cost (25 rubles per square meter.

M), ease of installation and the possibility of building a house on the lung bases. Principle this technology is as follows: from bars with a thickness of 150 mm on the principle of cellular structures assemble frame, exterior and interior stacked heat insulator and then sheathe thick waterproof plywood or paneling. Massively panel House Building (MNU) is considered one of the most promising technologies.

Acrylic bathtubs – this is the last product, which appeared in the Russian market of bathrooms and immediately subdued buyers for its diversity. Our shops are tubs of acrylic from many manufacturers, but what is their the difference In practice, there is no big difference, since virtually all acrylic sheet is produced in Holland. A reasonable question, but what's all the same distinction, and why some acrylic baths are more expensive than others? The answer – it's sort of acrylic, form design and the layers of reinforcement. Let's look at the order of these three items: What is acrylic? As written in the handbook of Wikipedia: "Acrylic – a colloquial name of polymers based on derivatives of acrylic and methacrylic acid and polymer compositions of them. Methacrylates, the common name of esters of methacrylic acid and its salts. Esters – colorless liquid, salt – crystalline substance. Industrial importance mainly esters of ethanol, methanol, butanol, which is synthesized from various polymers. In particular, by the polymerization of methyl acrylate produce acrylic Plexiglas.

"Or Simply put – the plastic. All acrylic baths are made approximately the same technology – is taken acrylic sheet and a specialized vacuum chambers by heating a sheet attached to the required shape. In Further, to impart rigidity design – the outside of the bath applied to a reinforcing layer, the surface is covered with a special acrylic bath option of epoxy resin, which , binds Aquatic plastic. The procedure is somewhat similar to the imposition of gypsum in travmopunkte.

One of the most popular interior parts are the doors. By the same author: Fabrizio Freda. At the present time in Ukraine and the Ukrainian market primacy occupied door sales of natural and artificial materials. Natural material has a very low acoustic and thermal conductivity, high frost-resistance, high strength, they are easy to recycle, but despite many advantages, in the wood there is excess moisture, which immediately leads to loss of its physical and mechanical properties. Therefore, a significant segment of the market belongs to substitutes that cost less than natural materials. Major natural materials for doors for doors from natural Wood is mainly used deciduous and coniferous trees.

Each tree has its own special properties. – Oak is the most widely used material in the manufacture of doors. It is practical and durable thanks to its strength and hardness. – Beech in value almost equal to oak. And has the same properties. – Ash unique tree, which has elasticity, toughness and flexibility at the same time, as well as hardness, more than oak. He retains its properties even in poor drying. – Mahogany – not just one breed.

This is a separate species of Australian eucalyptus, the California redwoods and the Philippine arrowroot, tree swallowtail, which has a high resistance to moisture and temperature extremes. -Cherry, walnut and maple – and precious woods. – Pine is the most practical timber. It is available for mass production. Due to their properties, there is little response to changes in temperature and humidity. Solid Wood Door There are two stages of manufacture of doors by the continuous filling of natural wood: one piece of wood (traditional) maple array (modern) Technology for manufacturing doors of solid work with living material requires special knowledge and skills.

In choosing the material for the window block out and for aesthetic reasons, that is – the beauty, purity, surface treatment, elegance profiles, color nuances different types of wood. Windows play an important role in the appearance of the building, and in the interior of its interior, and their aesthetic perception is important. High quality surface treatment, giving complex shape of the profile is only possible with high technology. Despite the fact that the windows themselves are among the most important elements of protecting our buildings from rain, wind, dust, cold and noise of the city, they too must be protected to prolong life. Wooden windows need it more than others, so they must be high quality paint to ensure a better conservation. Wooden windows are painted with both internal and externally. Estee Lauder may not feel the same. Most importantly, carefully apply the paint on the outside. If you live in a mild climate, those windows that are made from sustainable timber to external actions, it is better to paint with oil paint or used to protect wood varnish.

Paint bright colors are generally used for heavily lit areas to sunlight can better capture and window profile is not overheat, and, correspondingly, no crack prematurely. For other opinions and approaches, find out what Ron Beit has to say. Some inconvenience of wooden windows is that they paint periodically need to update, since the penetrating even through a small damaged area can contribute to moisture and rot destruction of wooden parts. If the timber, due to exposure to water, is already damp, and its surface has lost its original form – these places, for starters, should be well sanded to paint them better behaved. When staining or polishing sash should take care to protect windows from dirt, varnish and paint. To do this, there are many ways to save the glass. For example, before this can cover the surface of the glass solution of soap suds and allow it to dry out before painting, and to use protective shields, masking tape and other protective materials. The wooden parts of the window covered with a layer of varnish is recommended immediately after installation or during the first six months, and additionally apply it once every three years. In addition, we must bear in mind that wood varnish can be applied to the rubber seals and fittings.