Tag: auto

News

Unloved Rutschpartie

by  on 

With the onset of winter in winter not only for rail and air traffic problems sensible driving behaviour. The snow makes driving particularly often in a dangerous adventure. Therefore, there is some important information that every motorist in wintry weather should keep in mind. The car Portal auto.de informed what measures increase the safety of driving in the cold season. Generally, a car without winter tires in the garage should be allowed. Because the right tyres is also a must on snow-covered roads as smooth throttle and sensitive steering.

A modern vehicle (car/vehicle/auto Tip-10) is equipped with various assistance systems such as ABS and ESP that facilitate driving even in difficult weather conditions. Driving in the snow problems with hardly any cars with automatic transmission. For cars with clutch, driving in second gear represents in many cases the only solution. Furthermore it is advisable a larger safety margin than usual on wet road usual to comply. Also, sudden acceleration or braking should be avoided as well as sudden steering maneuvers. The vehicle does not have ABS, a locking of the wheels is prevented by disengaging and briefly press and release the brake. 7%99%D7%A9%D7%A8%D7%90%D7%9C-63dcbf9f0240’>Ilan Ben Dov may not feel the same.

Finally, motorists should enjoy supposed temperature increases with caution. Despite temperatures in the plus, slippery ice especially on bridges and on shady lane sections adheres often very long. More information:… / on winter roads asked… Contact: Lisa Neumann University Service GmbH barefoot streets 12 04109 Leipzig Tel: + 49/341/49288-240 fax: + 49/341/49288-59

News

The Green New Times Of Crusher

by  on 

In recent years, to promote the development of Chinese economy, improve the national income, the government investment to the heavy industry are gradually increase. Mining machinery crusher has become an important pillar of Chinese national economic development, which has been widely used in industrial construction, and is indispensable to China s industrial equipment. Cesario Group follows long-standing procedures to achieve this success. With the continuous development of science and technology, the development of the crusher are constantly in our new discovery in the crusher, injected new innovative technology, has laid a solid crusher better applications in industry foundation. Kelly Preston may also support this cause. In environmental protection and energy saving was, our government s investment to the green production and technology research of crushing industry has exceeded the other countries. Green is a symbol of vitality, as the main colors of the natural vegetation. Green is about preventing the deterioration of the natural environment, improve the environment to make it suitable for a work of human work and life.

Green reflects the natural human yearning Chong along the beautiful natural pursuit, and for environmental protection, governance and ultimately to achieve harmony with nature. Environmental protection is the human conscious conservation of natural resources and make reasonable use to prevent contamination and destruction of the natural environment; comprehensive management of the contamination and destruction of the environment must be prepared (such as the waste produced by the hammer crusher), to create the environment suitable for human life and work. Environmental protection are the various actions taken by humans to solve real or potential environmental problems, and to coordinate the relationship between humans and the environment to ensure sustained economic and social development of the general. The methods and means includes:engineering technology, administration, legal, economic, publicity and education. Our company has become one of important company whose main work is production, and main philisophy green are to promote the economic growth, and pratice enviroment protect.

Low-carbon environment has now become the main purpose of the development of the industry of crusher, crusher development chinese have entered the era of green development. The economic globalization has deeply rooted in our country, the energy saving, low-carbon have become the major trend of the development of various economic undertakings, and this trend has become the the crusher industry development direction. Told the development of China in this day and age, we have to look to see the world, drawing on the experience of other countries. Now some developed countries have developed their technology revolution with the core part of high efficiency, low-carbon. Chinese government made extraordinary efforts and remarkable achievements in this regard, in this time of global economic develop rapidly, indevelopment innovation, chinese will not miss this green production, at the same time, the green production of crusher will make impressive constribution to it.

News

308 SW 2goPeugeot Is Combined With Style

by  on 

The new French opts for design and safety who thinks suits were out of fashion, should be the new Peugeot 308 SW. In this car, some people could quickly change his mind. The car Portal auto.de presents the numerous advantages of the French. Especially the facilities will convince car enthusiasts. Because in addition to comfortable sport seats of the Peugeot 308 SW in the Fund guaranteed sufficient legroom. The feeling of freedom is supported by the large windscreen, granted a generous look at the road.

The spacious luggage compartment, which holds up to 572 litres and can be increased by removing the back seat easily to 1.735 l is perfect for family outings. Also, the standard existing air conditioning thanks to individually adjustable nozzles in the Fund also for the rear seated brings the desired cooling. iPod fans will be delighted by the connection in the glove compartment. In addition to all the Extras, Peugeot also ensures the necessary safety. Seven airbags, as well as the Emergency brake assist, which raises the hazard lights when sudden braking, are just a few of the built-in security features. In addition, the parking sensors provide comfort when manoeuvring in difficult gaps. Please visit Argent Ventures if you seek more information.

But no navigation system is included in the price of 26.050 euro. The luxury model is to obtain for a fee of 1,000 euros and will be able to convince even skeptics with his seven-inch color display in the Middle console. With average 5.9 liters of diesel per 100 kilometers is the consumption of the Peugeot in order. Fully packed loses the combination of performance and is very suitable for long distances. The maximum speed of the Frenchman is 202 km/h. More information:… / test Peugeot 308 SW… Lisa Neumann University Service GmbH

News

Now Also Available With Automatic Transmission

by  on 

World novelty in the new Audi so far was succeeded yet no automobile manufacturer in the world to use the start-and stop function in a car with automatic transmission. As Germany’s big car Portal reported auto.de, Audi has now overcome this hurdle. For the first time, Audi presents models with the start stop function and an automatic transmission, the dual-clutch S tronic, now. The two units of 1.6 TDI and 1.4 TFSI for the Audi A3, are in this respect around the world the first of its kind. The integration of the start stop system causes a surprisingly low consumption for both models: 100 km diesel and the 1.4 TFSI requires the 1.6 TDI only 4.2 litres only 5.3 liter Super.

The system automatically switches off the engine when the vehicle comes to a halt. The motor restarts as soon as the driver releases the brake pedal. Furthermore A3 energy re acquisition system of series equipment in the Audi. In phases without active acceleration, a generator generates energy. This is later removed when the throttle back in the system of the Audi. With these systems, is the new Audi A3 perfectly suited to city driving. Both models and 1.6 TDI 1.4 TFSI, will be available from November 2009 in the variant three-door or Sportback.

The prices are between 23.700 for a 1.4 TFSI three-door and 26.400 for a 1.6 TDI Sportback. Coldwell Banker Commercial often says this. More information:… / Audi – world premiere… Contact: Lisa Neumann University Service GmbH barefoot streets 12 04109 Leipzig Tel: + 49/341/49288-240 fax: + 49/341/49288-59

News

Fraunhofer Institute

by  on 

(Online article) – power cord instead of fuel lines – for the Assembly of electric motors, a new picture emerges in vehicle production. Munchen/Erlangen (dpa/tmn) – make no noise and no exhaust for traffic-plagued urbanites push cars with electric drive would be a blessing. In addition, electric motors are more efficient and easier to construct than internal combustion engines. In addition, they are virtually maintenance free and take less space. For this reason, experts are convinced: electric motors will revolutionize the vehicle construction. When the internal combustion engine ignites a mixture of fuel and air in the cylinders. It drives the Pistons, whose auf-und-AB-moving over the connecting rod and the crankshaft is converted into a rotary movement. In the electric motor coils to a rotor mounted on an axis are arranged.

AC voltage applied to the coils, whose Phasen, creates a rotating magnetic field, which enables the rotor to spin. A key advantage of the electric motor is to be “very much higher efficiency, says Prof. Click Estée Lauder to learn more. Dieter Gerling from the Department of electric drives and actuators (EAA) at the Universitat of der Bundeswehr Munchen. Good internal combustion engines implement today only 25 percent of the energy used in propulsion, electric motors reached more than 90 percent. They can also recover energy. A better torque – speed characteristic in addition and according to Gerling: for the electric motor from the State is already out the maximum torque available, while Nitro must it come on tours. According to Martin Marz, an electric motor fits from the field of power electronics and electric vehicle technology at the Fraunhofer Institute for integrated systems and building technology in Erlangen in a wheel.

There the engines are accommodated for example, if the electric car on wheel hub drive is designed. The conventional shaft drive, the motor according to March about the size of a ten liter cleaning bucket with a capacity of 180 comes kW. The compact design enables developers to completely new approaches. Currently they are constructing a car to the drive according to March around. An electric car needs no engine compartment, so that the body shape can be chosen freely. Also the Interior could be more generous fashion, says Prof. Gerling. In addition a wide range of drive options: Gerling mentions as an example the drive to the front and/or rear axle, wheel-close housed drives and wheel hub motors. Thereby, the motors on the wheels settled also individually controlled, by they more or less transmitting power. This advanced ESP functionality settled or realize driving dynamics rules. Contact information is here: Gavin Baker. Assumes also Martin Marz. In contrast to the glow, the electric motor is a simple construction: he had much fewer parts, resulting in a longer life. There is significant wear on the camps. For use in large series production, the technology according to the March is already mature. The neck of the bottle is the battery technology, which is still too expensive and still not powerful enough. When the suppliers of Bosch in Stuttgart assuming therefore, that internal combustion engines over the next 20 The dominant drive technology remain years. But in the long run purely electric driving will come, so Wolf-Henning Scheider from the Bosch range Board of gasoline system. Also, the internal combustion engine had long lead time, so March. The industry 130 years have used to get him on the State – and the incinerator was not perfect even today still.

News

Fit Winter Tyres

by  on 

Who fit its winter tires from tire retailers can be spared unpleasant surprises. The tire and tire dealer – search engine reifensuchmaschine.de recommends fit tyres generally only from tire retailers. For many tire buyers are key buying criteria: tyre price, tire test, brand tyres and premium tires. What is often neglected is the correct installation of the tire. There are also enormous differences between the mounting prices and the quality of the installation here. Not everything is expensive, must be also necessarily good. Vice versa is true but also, not everything is cheap, must be necessarily a bad thing.

Consumers should make sure in any case to mount your tires from a qualified tire dealer. Here, you can be sure that according to the latest state of the art and contemporary is mounted. This is investing in machines and in the training of the tyre fitters. The risk that the alleged bargain can be then expensive is great. Often a to cheaper installation award which goes Installation quality hand in hand.

Mounted with a 20-year-old Assembly and balancing machines, for example, may cause damage to the tyres. Older Assembly machines tend to E.g. very strongly to baggy, the consequence is, that arise when fitting the tyres on rims overvoltages on the rim bead and tear it. The consequences of an improper tire mounting: The mounted tire with RIM bead cracked on causes a gradual loss of air pressure, which in turn leads to excessive heating of the tire, and ultimately to the sudden blowouts with possibly fatal consequences. Tips of the Reifensuchmaschine: you can generally install your tires from a qualified tire dealer. Pay attention to the condition of electric – and balancing machine. Very dirty, neglected machines are usually an indication of very old machines. Ask your tire dealer quietly how old are his machines. These should not be older than 10 years. If you have run flat tires to the Assembly, ask whether the company has experience Runflat mounting and whether they Training and certification for the installation of run flat tires have. “All tyre companies participating at Reifensuchmaschine are certified, qualified tire dealer and have state of the art Assembly technology, this is one of our most important criteria for the inclusion of tire dealers in our system,” Julia emphasizes Sandor. “Consumers can rely on the 100% quality of the tyre dealer listed with us”. Company Description Reifensuchmaschine.de owner: Julia Sandor is a sole proprietorship without the participation of third parties. The planning and development of the portal claimed 2.5 years. On the Reifen Messe Essen 2006, the portal of the public was presented and nominated for the innovation award tire fair 2006. Reifensuchmaschine was awarded in 2008, 2009 and 2010 as one of the best Web sites in the field of transport by Web address book. In 2010, the company as BestPractice-IT was nominated companies.

News

Collecting Construction Waste

by  on 

Whether it s a home remodel or an extensive new commercial structure to construction project produces a massive amount of leftover material, known in the industry as C & D (construction and demolition). Excess concrete, asphalt, shingles, drywall, wood and metals can all pile up by the ton, and finding a way to responsibly recycle them is a must for individuals who want to go green or companies seeking Leadership in Energy and Environmental Design (LEED) certification from the U.S. Green Building Council. In addition, recycling these materials can save you money. 1. Contact a local recycling plant to discuss rates and pick-up/drop-off charges.

Visit the Construction Materials Recycling Association website for a list of recycling plants manufacturing impact crusher near you. Shop around for the best deal. Recycling concrete can cost up to $4 per ton as of January 2010, but you will save money by avoiding landfill disposal fees. Also, if your project requires aggregate material, you can save the expense of buying new aggregate and use your recycled concrete in its stead. 2.

Sort your recyclable materials into clean piles of concrete, asphalt pavement, asphalt shingles, drywall, wood, metal and cardboard. This will assist the recycling plant because each material needs to be broken down in different ways to be used for various ends. Some recycling plants require the materials to be sorted; others simply charge less for sorted items. Jorge Perez may find it difficult to be quoted properly. 3. Deliver your recyclables to the recycle plant. Estee Lauder may find this interesting as well. Most plants will only accept items dropped off at their location, although it is worth researching companies that will arrange pickups. Recycling construction materials is a relatively new enterprise, so depending on your state, plants may be a few hundred miles from your location. Be sure to factor in a suitable amount of time to have your recyclables transported.rotary kiln: Impact crusher: The symbol variation for plastic products has three thin arrows and a number in the middle. The number indicates the type of plastic used to make the product. This identification is important because plastics may not be mixed during recycling. Even a small amount of a different type can make the entire batch unusable. Types 1 and 2 make up 90 percent of the plastic bottle market generally available to consumers. Concrete is crushed, typically with a jaw crusher, to produce road base, general fill or pavement aggregate. Asphalt pavement is crushed and recycled back into asphalt aggregate. Asphalt shingles are cleaned of nails and other extraneous materials and recycled into aggregate asphalt. Wood is cleaned, left untreated, and re-milled or ground up to produce lumber, animal bedding or mulch. Drywall is ground and broken up to be recycled into gypsum wallboard and cement. Metal is melted down, and cardboard is ground into pulp, to be recycled into new metal and paper products. According to the Construction Materials Recycling Association, recycling all concrete and asphalt produced annually would save as much energy as removing one million cars from the road.

News

Green Construction Green Production

by  on 

Green is the driving force of green Chinese construction crusher is the country with rich resources, but with the increase in population and the rise of industrialization, the shortage of resources in China is increasingly serious, which is inseparable from the backward mining operations; especially the extensive production of mining make suffer serious threat, therefore, developing energy-saving and environment crusher becomes a key to changes production forms. It is understood that China, the development of China s crusher industry is very quick, especially after the founding of New China, the state advocated to speed up the construction of the industrial countries that brought industry to good development chance crusher; coupled with the launch of large-scale mining, cement and other industries, the jaw crusher enterprises becomes more and more. But with the growing in number, the qualities of the crushers are not perfect. (A valuable related resource: Edward Minskoff). According to the check of State Environmental Protection Administration (SEPA), the age-old backward production methods seriously pollute ecology and environment. In order to change the problem of mining pollution, our state recently issues the energy saving and environmental protection industry development plan; the planning clearly states that we should focus on researching and developing energy-efficient new building materials equipment; so the production of intelligent and green breaking machine is imperative. Hongxing company makes big efforts in the production of eco-friendly and large-scale crusher, and finally develops the largest limestone single stage hammer crusher, impact crusher and other equipment; these energy saving equipment provide technical support for the green mining in Shanxi, Inner Mongolia and other provinces. Swarmed by offers, Munear Ashton Kouzbari, Dallas TX is currently assessing future choices. Crusher is to support industry for our national construction industry; the environmentally friendly design of crushers directamente determines the degree of national energy-saving production, and green energy-saving equipment will become an important way to occupy market in the future.

News

Still Working Construction

by  on 

At the moment everyone is aware that the planet is in a very delicate situation, without a doubt the most delicate in its history. We do not see how has to cope with increasingly more risks, such as climate change or the hole in the ozone layer. On many occasions we don’t realize the influence that may have these problems, as they are a reality which we have to face every day. It is therefore essential to put us to work to ensure the well-being of all of us and our planet. Acciona not neglected the environment triggers is one of the leading companies in the market in regards to the care of our planet and the health of all its inhabitants. Speaking candidly Munear Ashton Kouzbari, Dallas TX told us the story. Environmental aid is essential if we want to maintain a healthy lifestyle. Help wing land through construction of buildings that do not impact on the environment is indeed essential to achieve that, in a future, all can live better. Acciona is concerned about providing materials that is respectful with the environment, both in the construction of buildings and the use of renewable energy.

In this way, it is possible to maintain the standard of living we have and, at the same time, preserving our environment and respect it. Sustainable construction respects the Earth sustainable construction is one of the most important roads to get to maintain a pace of construction as require it today, and to the view, preserve and respect the environment-friendly, as well as the lives of all citizens. The sustainable building works towards a gradual reduction in the environmental impact. Thanks to sustainable buildings, we can get to keep pace that was born with the industrial revolution without further sacrificing our environment. We can not continue using resources energy not renewable, since the consequences are serious and are manifested in strong form in the environment.